 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RPR-220 Sensors Reflective photosensor (photoreflector) RPR-220 The RPR-220 is a reflective photosensor. The emitter is a GaAs infrared light emitting diode and the detector is a highsensitivity, silicon planar phototransistor. A custom lamp was developed to enable the achievement of a smaller package than with conventional reflectors. 4.9 !Application Compact disc players, Copiers, Game machines, Office automation equipment !External dimensions (Units : mm) 6.4 2.8 2- 2 .2 Note : 1. Unspecified tolerance shall be 0.2. 2. Dimension in parenthesis are show for reference. 0.35 !Features 1) A plastic lens is used for high sensitivity. 2) A built-in visible light filter minimizes the influence of stray light. 3) Lightweight and compact. 6.5 1.4 (0.6) 4-0.6 Min 20 4- (2.8) (2.5) 1 2 4 3 1 Anode 3 Emitter 2 Cathode 4 Collector !Absolute maximum ratings (Ta=25C) Parameter Forward current Input (LED) Reverse voltage Power dissipation Collector-emitter voltage Output (Phototransistor) Emitter-collector voltage Collector current Collector power dissipation Operating temperature Storage temperature Symbol IF VR PD VCEO VECO IC PC Topr Tstg Limits 50 5 80 30 4.5 30 80 -25+85 -30+85 Unit mA V mW V V mA mW C C 2.51 (1) (3.2) (0.6) 0.50.1 1/3 RPR-220 Sensors !Electrical and optical characteristics (Ta=25C) Parameter Input characteristics Output characteristics Forward voltage Reverse current Dark current Peak sensitivity wavelength Collector current Transfer characteristics Collector-emitter saturation voltage Response time Symbol VF IR ICEO P IC VCE(sat) tr*tf Min. - - - - 0.08 - - Typ. 1.34 - - 800 0.3 0.1 10 Max. 1.6 10 0.5 - 0.8 0.3 - Unit V A A nm A V s IF=50mA VR=5V VCE=10V - VCE=2V, IF=10mA IF=20mA, IC=0.1mA VCC=10V, IF=20mA, RL=100 Conditions !Electrical and optical characteristic curves POWER DISSIPATION / COLLECTOR POWER DISSIPTION : PD / PC (mW) 100 FORWARD CURRENT : IF (mA) 1A Ta=25C 2.0 80 FORWARD VOLTAGE : VF (V) PC PD 100 1.6 60 1.2 10mA 1mA 0.8 10 40 1 20 0.4 0 0 20 40 60 80 100 0.1 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 0 20 40 60 80 100 AMBIENT TEMPERATURE : Ta (C) FORWARD VOLTAGE : VF (V) AMBIENT TEMPERATURE : Ta (C) Fig.1 Power dissipation / collector power dissipation vs. ambient temperature Fig.2 Forward current vs. forward voltage Fig.3 Forward voltage vs. ambient temperature COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) 2.5 VCE=2V d=6mm 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 Standard paper (90% reflection) d=6mm DARK CURRENT : ICEO (A) 2.0 1 IF=40mA 30mA VCE=30V 20V 10V 1.5 0.1 1.0 20mA 15mA 10mA 5mA 5 10 15 20 25 0.01 0.5 0 0 10 20 30 40 50 0.001 -100 -80 -60 -40 -20 0 20 40 60 80 100 120 140 FORWARD CURRENT : IF (mA) COLLECTOR - EMITTER : VCE (V) AMBIENT TEMPERATURE : Ta (C) Fig.4 Collector current vs. forward current Fig.5 Output characteristics Fig.6 Dark current vs. ambient temperature 2/3 RPR-220 Sensors RELATIVE COLLECTOR WRRENT : IC (%) 100 RELATIVE COLLECTOR CURRENT : IC (%) 160 FORWARD CURRENT : IF (mA) 100 140 120 100 80 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 80 60 10 40 20 1 0 2 4 6 8 10 12 14 0 0 20 40 60 80 100 DISTANCE : d (mm) AMBIENT TEMPERATURE : Ta (C) AMBIENT TEMPERATURE : Ta (C) Fig.7 Relative output vs. distance Fig.8 Relative output vs. ambient temperature Fig.9 Forward current vs. ambient temperature !Circuit for testing transfer characteristics Reflection plate d=6mm IF IC VCC=2V IF=10mA VCC 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0 |
Price & Availability of RPR220
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |